In this post you will find solution for damaged Nokia Lumia 520 battery connector. Battery connectors in these phones are soldered on to the motherboard and some times get damaged if the mobile phone is mishandled.
If a leg or two of the connector is broken just replace the whole battery connector with a new one. If the prints of the Nokia Lumia 520 battery connector are broken then you need to make the jumpers to the connecting points as shown in the diagram below.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
Here are Nokia Lumia 520 battery connector ways jumpers. Please study these diagrams very carefully before you start repairing.
The positive battery connector colored with red line is connected to the jumper point number J2000 and then V2001, C2001, C2000, C2002 and C2003. The negative battery connector in the middle marked with black line is connected to the jumper point number J2001 and then the forth leg of R2001. Third and the final leg is the BSI point and is colored with the green line, it is connected to the jumper point number J2002 and then V2000, C2005 and R2003.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.